Brown Well Pump Service has been serving the area in and around Shueyville for over a quarter of a century, and we know how to treat our customers right.

    “We are certified well drillers and pump installers. Whether you need a small repair to your well system or you are searching for a place that can help you with well pump installation, we can assist you. Our expert team can troubleshoot problems, perform maintenance work, and do installations. Give us a call today to get started on whatever you need! We look forward to hearing from you.”


    Pressure Tank Coralville

    Problems to Take Into Consideration with Your Pressure Tank

    The pressure tank in your Coralville, Iowa home produces a surge of air that helps propel water through your plumbing system. As a result, these tanks are one of the most essential parts of your plumbing system and help keep it operating smoothly and efficiently. Unfortunately, these units may suffer from complications that make them fail or causes inefficiency issues that can be hard to manage on your own.

    Therefore, you need to fully understand the common issues that may plague these tanks and the further concerns that they cause with your system. Just as critically, you need to be willing to let a professional manage these repairs for you and to know when you need help. A failure to get expert advice could result in a system that fails to operate and which costs you serious money to fix or replace.

    Pressure Tank Age

    A high-quality tank should last anywhere from 8-10 years without any problems. However, age will eventually start wearing down this tank and cause complications. This issue is particularly real if you don’t perform regular maintenance on your tank to keep it secure and stable for your home for the upcoming future.

    For example, many parts on your pressure tank are going to start wearing out, such as the various coils that help to produce the pressure needed for your tank. Just as importantly, other issues may trigger that cause even further complications and require more attention. Many of the problems listed below are likely to occur if your pump ages out.

    Pressure Tank Valves

    The valves on your pressure tank ensure that it properly distributes pressure and water throughout your home in a streamlined and straightforward way. These valves typically run very well without many issues for several years but may also experience problems if you don’t take the time to manage them properly. After all, without valves, the water flow will be even harder to control.

    Unfortunately, the valves are so crucial to the operation of your tank that minor malfunctions can cause significant issues. Valves may suffer from wear-and-tear problems that cause them to open and close improperly and trigger issues that spread throughout your system very rapidly. This cavalcade of issues can become very hard to manage.

    Pressure Tank Bladder

    The bladder on the pressure tank helps to push water through your system by utilizing compressed air to push water through a home every time an appliance is used. As a result, you could say that this is the most essential part of your tank and that it must be adequately maintained at all costs. If you don’t fix them immediately, anticipate a lot of spilled water.

    And while issues with these bladders aren’t incredibly common, they may wear out over time or experience a tear if the pressure on their sides is too high. As a result, you need to make sure to replace these bladders from time to time to keep them reliable and secure in your tank. Typically, spot repairs on their sides are not a good choice because they usually burst.

    Pressure Tank Usage

    When your tank runs smoothly, it should only pump as much water as you need and use only a small amount of pressure to achieve a balanced state. However, some malfunctions can cause the tank to pump too much water at once and may trigger other issues that make it harder to work correctly. Even worse, your pump is more likely to wear down more quickly.

    As a result, your pressure tank may start up more often than it should, which can cause inefficiency by making more water flow through your home than is necessary. Even worse, this excessive operation puts a lot of pressure on the bladder that could cause it to burst and lead to more issues. The sad thing is that most pump problems create a domino effect like this when they occur.

    Pressure Tank Leaks

    A typical pressure tank is designed to withstand high-pressure situations and will typically run well no matter what kind of pressure it experiences. However, these tanks may eventually develop some leaks throughout their body that causes problems with water flow and general pressure buildup.

    When leas develop in your tank, you’re going to see a lot of strain throughout the system. Puddles of water are likely to occur throughout your home that is hard to manage. Even worse, you’ll start losing pressure in your home’s plumbing and require help getting these levels back to normal.

    Pressure Tank Gauges

    The pressure gauges on your tank help you record how much strain is necessary to get water through your pipes. These gauges typically run quite smoothly without a lot of maintenance but may malfunction and cause issues with the amount of pressure that your pump creates.

    Unfortunately, improperly-operating pressure gauges can make your pressure tanks malfunction in several ways. First of all, they are likely to make your tank utilize undue pressure when pumping water. This issue can cause excessive strain on your pipes that are often hard to manage without help.

    Pressure Tank Punctures

    The sides of your tank are designed to be strong and to avoid puncture for years to come. However, there may come a time when your tank has a leak, either a small one or a large one. These holes might not seem like that big of a deal to some, but they can be a real issue without proper management.

    When these punctures occur, a variety of contaminants may quickly end up in your water supply. This problem is a serious one because it can cause bacteria, germs, mildew, and mold to get into your family’s bodies and trigger a multitude of complications that are best left to have never occurred.

    Professional Help Is A Good Choice

    As you can see, several problems can plague your tank over the years, each of which may cause different complications. Thankfully, most of these issues are pretty easy to handle without paying too much money. However, you are going to need a professional to manage most of them. Otherwise, you could end up making severe installation mistakes that cost you even more cash.

    So if you live in Coralville, Iowa and you need help with your pressure tank, please don’t hesitate to contact us at Brown Well Pump Service to learn more. Our professionals have years of experience working with individuals like you and will provide you with the high-quality attention, care, and repair expertise that you need to get the best results for your home’s needs.


    Get Quote Now