Brown Well logo

Should You Get A Well?

Posted on by Dotcom Design

Over the years, you’ve been debating well drilling in Cedar Rapids or Iowa City, Iowa, but haven’t yet made the plunge. There are many different reasons why you may want to consider this step. A good well can provide you with a surprising array of benefits that more than making it worth your consideration. While not always right for everybody, we at Brown Well Pump Service believe most people should enjoy a good well for their home.

Save Yourself Money

Well drilling may seem like an unnecessary expense that would cost you more money than it is worth. That isn’t necessarily the case. For example, many people find that drilling a well ends up saving them more money than they expected. And while you will end up spending a good amount of money to install a well in the first place – that step is inevitable – you will ultimately end up saving money because you’ll take your water into your hands.

First of all, you won’t have to pay the water bills you would every month with city water. Though these bills aren’t huge, they can add up over the years. For example, if you’re spending $20 per month on water, you’re paying $240 per year. Over a 30-year lifespan in a single home, that’s $7,200 that you spend just to use water. But if you spend a fraction of that cost to drill a well, you’ll have free access to water for your life, saving you a lot of real cash.

Even better, you may be able to get some tax breaks for using well water in a way that you can’t with city water. That’s because the federal and state governments often reward people for taking green steps to protect the environment. In some cases, you may be able to get all of the installation cost covered, depending on your state and their rules. Although this benefit is by no means guaranteed, knowing that you can get potential tax credits for your well water makes this a natural investment choice.

Over the years, you’ve been debating well drilling in Cedar Rapids or Iowa City, Iowa, but haven’t yet made the plunge. There are many different reasons why you may want to consider this step. A good well can provide you with a surprising array of benefits that more than making it worth your consideration. While not always right for everybody, we at Brown Well Pump Service believe most people should enjoy a good well for their home.

Save Yourself Money

Well drilling may seem like an unnecessary expense that would cost you more money than it is worth. That isn’t necessarily the case. For example, many people find that drilling a well ends up saving them more money than they expected. And while you will end up spending a good amount of money to install a well in the first place – that step is inevitable – you will ultimately end up saving money because you’ll take your water into your hands.

First of all, you won’t have to pay the water bills you would every month with city water. Though these bills aren’t huge, they can add up over the years. For example, if you’re spending $20 per month on water, you’re paying $240 per year. Over a 30-year lifespan in a single home, that’s $7,200 that you spend just to use water. But if you spend a fraction of that cost to drill a well, you’ll have free access to water for your life, saving you a lot of real cash.

Even better, you may be able to get some tax breaks for using well water in a way that you can’t with city water. That’s because the federal and state governments often reward people for taking green steps to protect the environment. In some cases, you may be able to get all of the installation cost covered, depending on your state and their rules. Although this benefit is by no means guaranteed, knowing that you can get potential tax credits for your well water makes this a natural investment choice.

Provide Fresher Water

City water is by no means dangerous or unhealthy to drink – it has been carefully tested, controlled, and balanced to make it as healthy as possible for a person. However, many people do not like the chemicals that are used to achieve this effect. For example, fluoride – though it does help to protect a person’s teeth – may be a chemical that people don’t want in their water. In this situation, well drilling is a good choice because the water will be much fresher.

That’s because well water has no chemicals added to it and is filtered using natural methods. As a result, this water has a more natural taste and is often more satisfying to many people. Though wells do have unique demands – such as regular bacteria testing and a careful balance of natural filtration methods – for those who want it, this type of water is often very fresh and filled with a myriad of high-quality minerals that may not be common in city water.

For example, trace elements, such as iron, are common in many types of well water. And these trace elements are often suitable for a person’s health and make their water healthier and more crucial for their overall health. However, some people may prefer to filter these elements out of their well water to make it as pure and fresh as possible. That choice is one that each person needs to consider for their needs because its benefits can vary quite heavily depending on the person.

Minimize Your Water Maintenance

Another cool thing about well drilling is that it may minimize your water maintenance in many ways. While you might think that you’d spend more because you’ll be adding a new well and need to pay attention to its machinery, you can surprisingly save yourself a lot of trouble with a well instead of city water. That’s because the well is going to possess far fewer components than a typical water system from the city, ensuring that you are safe and protected for years to come.

Instead of having multiple inputs and output pipes from a city water supply, you’ll have just one set that goes from your well to your home. In this way, you can create a more consistent and effective water system because you won’t have to upgrade your pipes as often or worry about breakdowns in as many systems. And many city-based water supply units are quite old, so putting in a new well gives you an immediate upgrade that ensures you are satisfied.

Just as importantly, taking control of your water ensures that you don’t have to wait on the city to do repairs. Though you may pay a little more on some repairs, such as replacing a well – you can get these repairs done on your terms. As a result, you won’t have to sit around the house and wait for repair experts to show up from the city or fight with them over scheduling. Instead, you can get the repairs done when you want and make sure that they are correctly done.

Protect the Environment

Lastly, well drilling can help you protect the environment in ways that you may not anticipate. That’s because city water is typically drilled from a myriad of different sources, each which requires a lot of careful preparation to keep it safe and healthy. For example, city water must go through treatment and cleaning after it has been used to circulate it back into the system. These steps do help make city water greener but utilize detergents and cleaners that you may not want in your water.

Thankfully, well water doesn’t have to worry about this problem because it uses natural filtration to keep your water safe. In a filtration field, your water will be filtered using rocks, soil, and other types of natural filtration processes. You can then remove this soil and replace it with new kinds to keep your area as a green as possible. Again, this may cost slightly more than water treatment but help keep the environment safer and cleaner.

Just as importantly, you are off the grid when you use well water and can create a self-contained water cycle that minimizes your water use in many ways. You may have to be more careful about your application and avoid contaminating elements, a good well can provide you with the water that your home needs to stay a comfortable place to live. And a good well also provides much tastier water that will be free of chlorine and other items that may impact your enjoyment.

We Can Help You

If you want the best well drilling Cedar Rapids and Iowa City, Iowa have to offer, please contact us at Brown Well Pump Service. We will do what we can to ensure that you are satisfied with your well.

City water is by no means dangerous or unhealthy to drink – it has been carefully tested, controlled, and balanced to make it as healthy as possible for a person. However, many people do not like the chemicals that are used to achieve this effect. For example, fluoride – though it does help to protect a person’s teeth – may be a chemical that people don’t want in their water. In this situation, well drilling is a good choice because the water will be much fresher.

That’s because well water has no chemicals added to it and is filtered using natural methods. As a result, this water has a more natural taste and is often more satisfying to many people. Though wells do have unique demands – such as regular bacteria testing and a careful balance of natural filtration methods – for those who want it, this type of water is often very fresh and filled with a myriad of high-quality minerals that may not be common in city water.

For example, trace elements, such as iron, are common in many types of well water. And these trace elements are often suitable for a person’s health and make their water healthier and more crucial for their overall health. However, some people may prefer to filter these elements out of their well water to make it as pure and fresh as possible. That choice is one that each person needs to consider for their needs because its benefits can vary quite heavily depending on the person.

Minimize Your Water Maintenance

Another cool thing about well drilling is that it may minimize your water maintenance in many ways. While you might think that you’d spend more because you’ll be adding a new well and need to pay attention to its machinery, you can surprisingly save yourself a lot of trouble with a well instead of city water. That’s because the well is going to possess far fewer components than a typical water system from the city, ensuring that you are safe and protected for years to come.

Instead of having multiple inputs and output pipes from a city water supply, you’ll have just one set that goes from your well to your home. In this way, you can create a more consistent and effective water system because you won’t have to upgrade your pipes as often or worry about breakdowns in as many systems. And many city-based water supply units are quite old, so putting in a new well gives you an immediate upgrade that ensures you are satisfied.

Just as importantly, taking control of your water ensures that you don’t have to wait on the city to do repairs. Though you may pay a little more on some repairs, such as replacing a well – you can get these repairs done on your terms. As a result, you won’t have to sit around the house and wait for repair experts to show up from the city or fight with them over scheduling. Instead, you can get the repairs done when you want and make sure that they are correctly done.

Protect the Environment

Lastly, well drilling can help you protect the environment in ways that you may not anticipate. That’s because city water is typically drilled from a myriad of different sources, each which requires a lot of careful preparation to keep it safe and healthy. For example, city water must go through treatment and cleaning after it has been used to circulate it back into the system. These steps do help make city water greener but utilize detergents and cleaners that you may not want in your water.

Thankfully, well water doesn’t have to worry about this problem because it uses natural filtration to keep your water safe. In a filtration field, your water will be filtered using rocks, soil, and other types of natural filtration processes. You can then remove this soil and replace it with new kinds to keep your area as a green as possible. Again, this may cost slightly more than water treatment but help keep the environment safer and cleaner.

Just as importantly, you are off the grid when you use well water and can create a self-contained water cycle that minimizes your water use in many ways. You may have to be more careful about your application and avoid contaminating elements, a good well can provide you with the water that your home needs to stay a comfortable place to live. And a good well also provides much tastier water that will be free of chlorine and other items that may impact your enjoyment.

We Can Help You

If you want the best well drilling Cedar Rapids and Iowa City, Iowa have to offer, please contact us at Brown Well Pump Service. We will do what we can to ensure that you are satisfied with your well.

What Is A Submersible Pump?

Posted on by Dotcom Design

Water pumping can be a significant challenge for many because it takes a lot of time to understand your pump choices fully. Thankfully, you can buy a submersible pump in Cedar Rapids, Hiawatha, Marion, Iowa City, Coralville, or North Liberty, Iowa, to handle this need. These pumps can work for residential, commercial, or industrial properties and provide a broad array of benefits that make them more than worth your time. So please read on to learn more about the many pumps that we offer our customers. Doing so could save you a lot of money and time and keep your pump choice smart.

What is This Type of Pump?

A submersible pump is defined as an air-tight sealed motor that is designed to provide a variety of different benefits. Typically, this pump never requires priming because it is submerged in fluid and gets primed in this way. In fact, a good pump of this type is never taken out of water because it can cause complications that make it impossible to operate correctly without issue.

Typically, these pumps are an excellent choice for a large number of situations. For example, areas that have a confined or difficult place may be a good choice for these pumps. That’s because they are designed to fit into a large number of areas without complication. Just as importantly, they can be run almost automatically, though you may need to check them from time to time to ensure proper operation.

When deciding on a pump for a well, this option is often one of the best you can find. That’s because you can place it directly in your water source and get high-quality water pumped directly to your home, business, or work site. Before we move on to the benefits of this pump – and the drawbacks – we should also talk about how it operates to give you a better and more full understanding.

How These Pumps Work

A typical submersible pump works in a reasonably simple way. It starts by converting rotary energy into kinetic energy by using pressure energy pulled in from the pump. As the water goes through the pump, it goes through the intake and s then pushed through the rotation of the impeller and into the diffuser. After this point, the water will then flow up to the surface where it can be used appropriately.

In this way, these pumps are considered a multistage centrifugal pump. Each operates in a vertical position to produce a large amount of pumping power. The hydraulic motor inside of the pump is often a closed cycle pump, though it may also be an open cycle in some instances. The differences between the two aren’t that important to consider because of how both work in very similar ways.

Without dwelling too much on the mechanical aspects, anyone interested in this pump should also keep a few other elements in mind. First of all, your pump must be submerged at all times to provide benefits. If it comes out of the water, it may end up overheating or experiencing other complications. Thankfully, these are usually quite minor and shouldn’t be too hard to avoid if you take the time to understand the full operational possibilities of this pump fully.

A typical submersible pump also has a multitude of different operational uses to keep in mind. For example, they can be used to drain fluids from a large field to keep their water levels reasonable. They can also be used to move sewage, manage pond filter operation, and can even be used in oil wells. And the types that we offer are often used to pump water for wells in homes or businesses. This diverse range of processes makes them a useful tool to keep in mind for your service.

Benefits and Disadvantages of This Pump

Now that you fully understand how a submersible pump works, you can take a look at their advantages and disadvantages. These considerations apply to all pumps of this type and must be thoroughly debated before you make a purchase. While the benefits below do outweigh the negatives, you should still be very careful when making any serious investment like this:

  • No need to prime – This benefit helps to make this pump one of the most accessible classes to operate and will ensure that you don’t spend too much time or money on them or their upgrades
  • High efficiency – The low level of energy necessary for using this type of pump makes them very efficient and an excellent choice for those who don’t have a lot of money
  • Selection option – You should be able to find a wide variety of submersible options for your pumps, which makes them an excellent choice for those who have many uses for these units
  • Quiet operation – Most submersible units of this type are very quiet because they are under water and because cavitation or a spike in pump pressure is never an issue with this unit

These benefits are significant and make this pump option a great choice. A few drawbacks that you also need to understand include fully:

  • Seal corrosion – If the seal on your pump corrodes, water will seep into the motor and may cause severe damage that is costly to repair
  • Some use limitation – Though these pumps have many great uses, there are a few situations in which they may not work, though they are great for water wells
  • Overheating potential – If your well runs out of water or gets too low, your pump may end up overheating because the surrounding water controls its temperature

As you can see, these issues are not that problematic if you know how to prepare for them. For example, you should contact a repair technician to maintain your pump’s seal every year. And you need to check your water levels regularly to keep them appropriate. Taking all of these simple steps can ensure that your pump is in great shape for years. It can also save you money by avoiding costly repairs and other issues with a pump.

Don’t Forget Our Help

So if you are interested in a submersible pump in Cedar Rapids, Hiawatha, Marion, Iowa City, Coralville, or North Liberty, Iowa, please contact us at Brown Well Pump Service. Our experts have years of experience working with people like you. And we can provide the kind of installation and repair help that you need to keep your pumps working as smoothly as possible. We look forward to working with you and keeping your pump secure and reliable for the many, many following years.

The Benefits of a Submersible Pump

Posted on by Dotcom Design

A high-quality pump is often absolutely necessary for a large number of different facilities including homes, commercial businesses, and industrial companies. Some may need a submersible option due to its many benefits. So if you’re interested in a submersible pump in Cedar Rapids, Hiawatha, or Marion, Iowa, make sure to read on to get an insight into how they can benefit you and whether or not they are right for your home or industrial facility.

Strong Design That Rarely Fails

The first significant advantage of the submersible pump is its excellent exterior design. The average pump of this type is designed to be as tightly contained as possible. A large amount of high-quality metal, various types of secure soldering, and even multiple methods of welding are used to hold these pumps together and to keep them from failing or experiencing unexpected issues in many situations.

Thankfully, this highly-contained design uses watertight gaskets, strong seals, and much more to hold out water and keep your pump working smoothly. As a result, the interior is less likely to wear down due to exterior weathering issues. Just as importantly, this protection also helps to keep a variety of problems, such as electrical issues, from developing on your pump as it operates.

How do electrical problems occur in a pump when it wears down? Well, a pump with a compromised exterior may let in a massive influx of water that wears away various areas on the inside of the pump. When this situation happens, water may get into the electrical components of this pump – often dirty or contaminated water – and cause serious malfunctions that may affect how well your pump operates.

Direct Pressure Operational Methods

Almost all submersible pump models utilize a method known as direct pressure. This method varies from indirect pressure based on the strength and stability that it provides. Indirect pressure may use a little less electricity or power – though it isn’t actually more efficient – but doesn’t offer the kind of high-power flush that you can get with a high-quality direct-pressure pump.

As a result, those who need a stronger pump often turn to this option because it can move a large volume of fluids relatively quickly through a large number of pipes. Compared to pump options such as jet or shallow well options, submersible models often move higher amounts of fluid using less electricity. This benefit is huge if you run a large facility and have high energy-use bills.

Just as importantly, each of these pumps is typically placed in a way that makes it easier to operate. For example, pump position is often carefully chosen to ensure that they not only don’t have to prime – as priming decreases operational speed when necessary – but are also typically positioned in a way that helps to pump more efficiently. This efficiency benefit will be discussed in more depth below.

Highly Energy Efficient

Energy efficiency is an essential element for a large number of people. Whether you’re a homeowner or run an industrial facility, you want to make sure that you decrease your energy use to a reasonable level. And pumps are often one way that you can manage this situation. Though all pumps will use a specific range of electricity or power, submersible options are among the most energy-efficient and can save you real cash every month and year.

For example, submersible models typically use only a very narrow flow range to ensure that they don’t have to use a wildly-varying level of energy. This benefit may not be immediately apparent to some, but it can be significant in many situations. Simply put, fewer stages or operational levels means that the pump works only in a specific way and doesn’t waste electricity as it operates or pumps fluid throughout your building or facility.

In fact, most submersible pump options are designed specifically for a facility to ensure that its needs are handled. For example, you can set a high-end flow that is a little higher than what your facility needs. You can then create stages for the pump’s operation that will handle a multitude of your needs. This type of design is often very common in industrial facilities and requires that you purchase a customized option to get the most benefits possible from your pump.

Can Handle Solid Materials

Lastly, a high-quality submersible pump is designed not only for liquid materials – which are relatively easy to move with most pumps – but solids as well. As a result, they are often an excellent investment for many different people, including homeowners and those who run an industrial business. Let’s examine a few situations in which you might need to move solid materials with a pump.

For example, a flood in your basement could trigger an influx of a large number of solids that are hard to handle. These can include fecal matter and other waste that may flow through your home. And if you run an industrial facility, you may find a large number of solids flowing your plumbing system, which threatens to cause your plumbing to collapse or fail without a high-quality pump.

Thankfully, a submersible option is strong enough to handle solids and can do it without causing severe operational errors in your facility. Just as importantly, you can add a large number of pumps to various spots throughout your building, as necessary, to ensure that things go smoothly. This step is often the best option for people who aren’t sure if they have solids to handle or not.

We Can Help!

So if you’re interested in a submersible pump in Iowa City, Coralville, or North Liberty, Iowa, and want to make sure that you get the best option possible, don’t hesitate to contact us at Brown Well Pump Service right away to learn more. Our professionals have years of experience in the field and will do what is necessary to ensure that you have the highest-quality pump possible.

Get Quote Now